Smart Denture Conversions ›

Smart Denture Conversions: Training Videos

Get trained on Smart Denture Conversions with one of its creators, Dr. Brandon Kofford. Watch the full technique in order, or jump straight to the step you need.

SDC 1.0 technique series

Dr. Kofford takes you through the entire technique, start to finish. Pick any step from the list to play it here.

Video 1 of 16 · Introduction

Welcome to Smart Denture Conversions

A quick introduction to Smart Denture Conversions from one of its creators, Dr. Brandon Kofford. He provides an overview of the system and explains how Separable Fastener technology makes it all work.

Video 2 of 16 · A: Preparation

A1: Pre-Coating

Pre-coating your TiBases and Separable Fasteners before surgery is the best way to set yourself up for success with Smart Denture Conversions. Dr. Kofford shows different pre-coating techniques that can be done in minutes.

Video 3 of 16 · A: Preparation

A2: Locating Abutments

Dr. Kofford shows how to use bite registration material and teflon tape to clearly mark the location of the abutments that will go into your denture.

Video 4 of 16 · A: Preparation

A3: Closed vs. Open Flap

Dr. Kofford discusses best practices for using Smart Denture Conversions in closed versus open flap scenarios.

Video 5 of 16 · A: Preparation

A4: Marking Positions & Creating a Silicone Dam

Dr. Kofford shows how to mark the position of your multi-unit abutments and place silicone to act as a dam.

Video 6 of 16 · A: Preparation

A5: Placing Separable Fasteners & TiBases onto the Multi-Unit Abutments

Place the silicone dam and attach your pre-coated Separable Fasteners and TiBases to the multi-unit abutments as you prepare for the pickup.

Video 7 of 16 · B: Passivity

B1: Cutting “Wells” in the Bite Registration

Grab your handpiece and create space, or “wells,” in your bite registration.

Video 8 of 16 · B: Passivity

B2: Checking Passivity

Make sure your denture is passive and ready to pick up, plus how to quickly correct the denture if you find binding.

Video 9 of 16 · C: The Pickup

C1: Placing the Denture for Pickup

Dr. Kofford shows how to inject acrylic into the denture and place it in the mouth in preparation for pickup.

Video 10 of 16 · C: The Pickup

C2: The Pickup (Remove the Denture)

Dr. Kofford removes the denture, picking up the TiBases in the process, thanks to Separable Fastener technology.

Video 11 of 16 · D: Contouring

D1: Contouring the Denture

Following the pickup, Dr. Kofford takes you through the burs and the process of contouring the denture to prepare it to go back in the mouth.

Video 12 of 16 · E (Optional): Stone Model

E1: Create a Master Cast

An optional but highly beneficial step: create a stone model from your completed denture so you can work on the model, instead of in the mouth, should anything happen during osseointegration. Includes how to use the Protective Plugs.

Video 13 of 16 · E (Optional): Stone Model

E2: Duplicate the Prosthesis

With a master cast created, you can now duplicate your prosthesis.

Video 14 of 16 · F: Screw Channels

F1: Create Screw Channels & Remove PEEK Caps

Create the screw channels that give access for the prosthetic screws, plus a couple of techniques for removing PEEK caps.

Video 15 of 16 · G: Finishing

G1: Final Steps to Complete Your Smart Denture Conversion

Your Smart Denture Conversion goes into the mouth and gets tightened into place, using the included tools to secure your provisional prosthetic.

Video 16 of 16 · Conclusion

Congratulations

If you have reached this video, you have made it to the end of your first Smart Denture Conversion. With some practice, Smart Denture Conversions can be completed in as little as 30 minutes.

All steps16 videos
Introduction
A: Preparation
B: Passivity
C: The Pickup
D: Contouring
E (Optional): Stone Model
F: Screw Channels
G: Finishing
Conclusion

SDC 2.0: The Full Workflow

The Updated SDC Workflow

Dr. Brandon Kofford

Dr. Kofford walks through the upgrades and updated workflow in Smart Denture Conversions 2.0, specifically when using the Threaded Post version of our Pre-Coated TiBases.

Troubleshooting

What to Do If a TiBase Doesn’t Pick Up

Dr. Brandon Kofford

Even with a careful setup, a TiBase occasionally stays behind. Dr. Kofford walks through the recovery protocol step by step, so you can handle it in the lab in under ten minutes and deliver a complete, passive provisional without going back to the patient’s mouth.

Clinical videos

Real cases, chairside.

Smart Denture Conversions Case Example

Dr. Safa Tahmasebi

Dr. Tahmasebi demonstrates a simplified workflow for same-day, immediate-load prosthetics with Smart Denture Conversions.

Dual Arch Denture Conversion the Smart Way

Dr. Brandon Kofford

Converting upper and lower dentures into fixed implant-supported provisionals for All-on-X cases.

Mandibular Pickup with Smart Denture Conversions

Dr. Brandon Kofford

A mandibular TiBase pickup, converting a denture into a fixed implant provisional.

Removing the Denture after Pickup

Dr. Brandon Kofford

Once the pickup material sets, the back of a cotton forceps pops the prosthesis free.

Creating Screw Access after Pickup of the TiBases

Dr. Brandon Kofford

Three steps to create conservative screw access holes after the TiBase pickup.

Result of a Dual Arch Conversion Done the Smart Way

Dr. Brandon Kofford

A look at a completed dual arch conversion made with Smart Denture Conversions.

How Smart Denture Conversions works

Short explainers and overviews to share with your team.

Introducing Smart Denture Conversions

A short overview of the Smart Denture Conversions system and how it works.

Smart Denture Conversions in Under 30 Minutes

Watch a complete denture conversion in real time, from start to finish.

Better Denture Conversions with Smart Denture Conversions

How Smart Denture Conversions simplifies the workflow for same-day, immediate-load provisionals.

Smart Denture Conversions with an Avadent Denture

Converting an Avadent monolithic denture into a fixed denture on multi-unit abutments.

Smart Denture Conversions Workflow by ZimVie

An animated walkthrough of the Smart Denture Conversions workflow, made by ZimVie.

History

How Smart Denture Conversions Was Created

Dr. Brandon Kofford with Ray Salermo

Dr. Kofford and Ray Salermo talk through how Smart Denture Conversions came to be.

Have a question about a step?

Our clinical team can walk you through it.

Contact us